CT Valve: Optimum Valve Type for High Speed Compressor
Oil viscous ash causes premature valve failure, especially at high speed. CT valve is a high efficiency valve specially developed for oil lubrication. At present, more than 350 000 CT valves are operating normally on natural gas and process compressors.
Unique valve design is the best choice for high speed and short stroke gas compressor
The circumferential spring reduces the tilting motion of the valve plate and effectively reduces the closing impact of the valve.
Non-metallic valves and springs effectively mitigate the additional opening impact due to oil viscous
The failure rate of intake valve of matching Jindi fork-foot unloader is very low
Advantages of CT valve:
High flow efficiency and low valve loss
Long service life under bad working conditions
Adapt to changeable working conditions
Industrial applications
Natural gas industry:
- Gas gathering and transportation
- Gas collection
- Gas storage

Chemical process area:
- Refining industry
- Petrochemical Industry
- Chemical industry
Application scope
Compressor parameters:
- Maximum speed: 1800RPM
- Lubrication: Oil or non-oil lubrication

Operating condition parameters:
- Maximum exhaust pressure: 350 bar(5075 psi)
- Maximum differential pressure: 150 bar(2175 psi)
- Maximum exhaust temperature: 250° C(482° F)

Valve type series:
- Diameter: 64mm-221mm
- Maximum lift: 2.8mm
Air volume regulation:
Switched Stepless Gas Volume Regulation Stepless Gas Volume

© 2019 Wenzhou Jingdi Compressor Manufacturing Co., Ltd. All Rights Reserved.   Design: Nsoso.com